Description of the problem
We have realized that with some drivers the error message „The specified printer driver was not found on the system and needs to be downloaded“ (error 3019) is displayed during the replication via the steadyPRINT Center. After a manual installation of the driver on the target system and the new printer replication, it works as usual. Could you provide further assistance?
Description of the problem
The integrated replication does not support the replication of v4 printer drivers.
Description of the problem
We are currently using steadyPRINT in combination with the reliability function (master- and backup print server). In the steadyPRINT manual we read that after each change of the printers (settings) a new printer replication has to be performed on the master print server so that the backup print server has the same configuration status. Is it possible to automate this process?
Description of the problem:
This article describes known problems that might occur during the installation and/or the setup of steadyPRINT VPD as well as appropriate solutions. The basic and detailed installation guide from https://www.steadyprint.com/user-manual/virtual_printer_driver_vpd.htm serves as the basis. For installation and setup, please follow the steps described.
Known Issue Version 5.2.1
Description of the problem:
We have noticed that during the replication process the safety settings of the printers do not seem to be accepted. Can you provide further assistance?
This article describes the integration of a backup print server into steadyPRINT in order to guarantee the reliability of the master print server.
Description of the problem
We would like to restart our print server once a week. The next morning we then have the problem that the master print server is in maintenance mode. Is there a possibility to deactivate the maintenance mode via script or something similar?
Description of the problem
During the printer replication via the steadyPRINT Center we partly receive the message “print spooler does not respond” followed by the cancellation of the replication. Can you provide further assistance?
Description of the problem
The technical implementation of the new licensing had long remained to be done. In version 5.1.1 this can now be realized. Depending on the used license, only those functions which have actually been licensed are provided. As a result it can happen that features used before are now no longer available.
Description of the problem
Due to a timimg problem when starting the steadyPRINT Server, the fallback mode might erroneously be activated. This problem will be solved with the new release 5.1.1 which will be available in November!
